Figure 4-2
Further information
Additional information about EMC-compliant installation is available in the Internet:
60612658)
4.1.2
Cables
Cables with a high level of interference and cables with a low level of interference are
connected to the inverter:
● Cables with a high level of interference:
– Cable between the line filter and inverter
– Motor cable
– Cable at the inverter DC link connection
– Cable between the inverter and braking resistor
● Cables with a low level of interference:
– Cable between the line and line filter
– Signal and data cables
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Grounding and high-frequency equipotential bonding measures in the control cabinet and
in the plant/system
EMC installation guideline
4.1 EMC-compliant installation of a machine or system
(http://support.automation.siemens.com/WW/view/en/
Installing
55