Extended Messages - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Advanced commissioning

6.16 Extended messages

Extended messages

You must configure the "Extended messages" function module in order to be able to use the

extended messages.

Inverter function modules (Page 132)

Delay for comparison n > n_max (Factory setting: 200 ms)

Speed threshold value 5 (Factory setting: 900 rpm)

Delay for n_act comparison with speed threshold value 5 (Factory setting: 10 ms)

Speed threshold value 6 (Factory setting: 900 rpm)

Delay for n_act comparison with speed threshold value 6 (Factory setting: 10 ms)

Current threshold value (Factory setting: 0 A)

Current threshold value reached delay time (Factory setting: 10 ms)

DC-link voltage threshold value (Factory setting: 800 V)

DC-link voltage comparison delay time (Factory setting: 10 ms)

Torque threshold value comparison delay time (Factory setting: 200 ms)

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG