Starting Wizards For The Quick Commissioning - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Commissioning

5.4 Quick commissioning with a PC

Starting wizards for the quick commissioning

Starting commissioning wizards

1. In the project, select the drive you wish to commission.

2. Press the following buttons:

You have started the commissioning wizard.

Select the application class

When selecting an application class, the inverter assigns the motor control with the appropriate

default settings:

● [0] Expert - or if no application class is listed:

Standard Drive Control (Page 139)

Dynamic Drive Control (Page 141)

Expert (Page 143)

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG