Installing The Reader Heater; Preparing The Parts; Installing The Reader Heater Harness - Canon iR2020 Series Service Manual

Chapter 2

2.7 Installing the Reader Heater

2.7.1 Preparing the parts

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing, make sure the heater PCB has been installed.
1) Prepare the following parts.

2.7.2 Installing the Reader Heater Harness

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
Before installing, make sure the host machine is turned off. If it is turned on, go through the following:
1. Turn off the main power switch.
2. Disconnect the power cable (from the power outlet).
3. Disconnect the power cable.
2-32
[1]
[3]
[5]
F-2-86
[1] Reader heater
[2] Heater harness
[3] Harness guide
[4] Right heater base
[5] Heater cover
[6] Clamp
[7] TP screw (M3x6)
[2]
[4]
[6] [7]
2 pcs.
1 pc.
1 pc.
1 pc.
2 pcs.
6 pcs.
5 pcs.
0011-3368
0011-3371