Motor Of Main Drive Assembly; Removing The Rear Cover; Removing The Main Motor; Fixing Driver Motor - Canon iR2020 Series Service Manual

5) Remove the fan filter [1] from the duct.
[1]
MEMO:
When a duplex unit is used, first remove the duplex unit and next remove the
fan filter from it.

9.4.10 Motor of Main Drive Assembly

9.4.10.1 Removing the Rear Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].

9.4.10.2 Removing the Main Motor

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Disconnect the connector [1], remove three screws [2], and then remove
the main motor [3].
[2]
[1]
F-9-81
F-9-82
[1]
[2]
[1]
F-9-83

9.4.11 Fixing Driver Motor

9.4.11.1 Removing the Rear Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the rear cover [2].

9.4.11.2 Removing the Left Cover (Rear)

0011-0048
iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the three screws [1], and then detach the left cover (rear).
[2]
[1]
0011-0049

9.4.11.3 Removing the RAM Cover

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Remove the four screws [1], and then detach the RAM cover [2].
[1] [3]
[2]
F-9-84
F-9-85
F-9-86
Chapter 9
0011-0406
[1]
[2]
[1]
0011-0407
0011-0621
9-17