Motor Of Main Drive Assembly; Removing The Rear Cover; Removing The Main Drive Assembly - Canon iR4570 Series Service Manual

Chapter 10
F-10-160
5) Disconnect the connector [1], and detach the heat
discharge fan [2].
F-10-161
10.5.14 Motor of Main Drive
Assembly
10.5.14.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
10-50
10.5.14.2 Removing the Main
Drive Assembly
iR3570 / iR4570
1) Disconnect the connector [1], and free the harness
[2] from the wire saddle.
0007-7368
2) Remove the 4 screws [1], and detach the main drive
assembly [2].
[1]
[3]
[1]
[1]
[1]
[1]
[1]
[1]
[2]
F-10-162
F-10-163
[1]
[1]
[1]
[1]
[1]
[1]
0007-6418