Showing Policy-Map; Showing Mls Qos Interface; Showing Mls Qos Queueing - D-Link xStack DGS-3610 Series Configuration Manual

DGS-3610 Series Configuration Guide
45.3.2

Showing policy-map

You may show the contents of policy-map through the following steps:
Command
show policy-map [policy-name
[class class-name]]
For example,
DGS-3610# show policy-map
Policy Map pp
Class cc
DGS-3610#
45.3.3

Showing mls qos interface

You may show the QoS information of all ports through the following steps:
Command
show mls qos interface [interface|
policers]
For example,
DGS-3610# show mls qos interface gigabitEthernet 0/4
Interface GigabitEthernet 0/4
Attached input policy-map: pp
Default COS: trust dscp
Default COS: 6
DGS-3610#show mls qos interface policers
Interface: GigabitEthernet 0/4
Attached input policy-map: pp
DGS-3610#
45.3.4

Showing mls qos queueing

You may show the QoS queue information through the following steps:
Command
show mls qos queuing
For example:
DGS-3610# show mls qos queuing
Description
Show QoS policy map,
policy-name is the selected name of policy map, specified
as class
Show the class map bound with the policy map in case of
class-name
Description
Show the QoS information of the interface,
The Policers option shows the policy map applied on the
interface.
Description
Show the QoS queue information,
CoS-to-queue map,
wrr weight and drr weight;
Chapter 45 QOS Configuration
45-15