Configuring The System For Dicom Transfer; Connecting To The Network - FujiFilm SonoSite X-Porte User Manual

DICOM printers
Storage commitment servers
The system can transfer to one or more devices and connect to different networks, depending on how you
configure it. The DICOM log collects network errors and events, typically to support diagnostics (see
on page 3-26).
Related topics
Logs ................................................................................................................................................................................ 3-26
CDA Report settings .............................................................................................................................................. 3-10
Network Status settings ...................................................................................................................................... 3-27
Connectivity settings ............................................................................................................................................. 3-11
Routing selections ................................................................................................................................................... 3-34

Configuring the system for DICOM transfer

To configure the system for DICOM transfer, you do the following tasks (typically completed by a network
administrator or PACS manager):
1 Back up default DICOM configuration settings to a USB memory stick kept in a secure location. You can
revert to the default settings if necessary. See
page 3-12.
2 Connect to the network. See
3 Complete the configuration pages for locations and devices. See
page 3-16.
4 Associate devices with locations. See

Connecting to the network

Before configuring the system for DICOM transfer, you must connect to the network. You can connect by
Ethernet or wirelessly.
To connect to the network by Ethernet
The SonoSite X-Porte ultrasound system must be connected to a standard Ethernet 10/100/1000 network.
Devices connected to the system's Ethernet port must comply with the IEC 60601-1 or IEC 60950
standards.
3-14
"Importing and exporting connectivity settings"
"Connecting to the network"
"Associating devices with locations"
on page 3-14.
"DICOM configuration pages"
on page 3-23.
Setting up the system
"Logs"
on
on