FujiFilm SonoSite X-Porte User Manual page 53

Configuration setup fields
Location
Required fields are marked with asterisks.
Name
Unique network name for the ultrasound system. The default is SonoSite.
Alias
Name that identifies the network location of the ultrasound system.
AE Title
DICOM Application Entity Title.
Port
Device port number. IP port 104 is typically assigned for DICOM.
DHCP
If desired, select to enable Dynamic Host Configuration Protocol. The IP Address, Subnet Mask, and
Default Gateway fields become unavailable.
IP Address
Unique identifier of the ultrasound system location. Cannot be between 127.0.0.0 and 127.0.0.8.
Subnet Mask
Identifies a network subdivision. The default value is 255.255.0.0.
Default Gateway
IP address where network connects to another network. Cannot be between 127.0.0.0 and 127.0.0.8.
Transfer Images
Specify when to transfer images: during or at end of exam.
JPEG Compression
Select High, Medium, or Low. A high compression has a smaller file size but less detail. For best image
quality, select Low. See
Wireless
Select if configuring a wireless location.
The following fields are available for wireless network connections:
Profile Name
Name of the profile set for this location. For each wireless location, you can have up to 10 profiles.
Setting up the system
"Limitations of JPEG format" on page 3-37.
3-17