FujiFilm SonoSite X-Porte User Manual page 85

Table 4-1: 2D controls (continued)
Button name
Autogain AutoGain control: adjusting to the positive side brightens images
Adjust when you tap AutoGain, adjusting to the negative side makes
images darker when you tap AutoGain. Tap AutoGain to make the
control available (see
then drag the slider (the range is -6 to +6) or tap +3, 0, or -3.
The AutoGain Adjust control is disabled when you perform any
action that turns off AutoGain, such as changing depth.
Sector Specifies the sector width. Tap this control and then tap Narrow,
Medium, or Full. Steer reduced size sectors left or right by
dragging from anywhere within the sector.
Available only in the Cardiac exam type for certain transducers.
Video Clip See
Settings
Needle Guide Turns needle guidelines on and off. For more information, including
a list of transducers that are needle-guide capable and important
safety information, see the transducer's user guide and Using
CIVCO Products with FUJIFILM SonoSite Systems.
Only compatible with Full sector.
ECG Displays ECG trace options. ECG is available only on the cardiac
exam type. See
Procedure Tap this control to turn it on (highlighted icon) or off (dimmed icon).
Mode Allows you to view the image uninterrupted; for example, during a
needle insertion procedure. When this control is enabled, the
following are disabled:
Dialog boxes or other system elements that block the image
Sleep mode and automatic power-off
Dyn. Range Adjusts the grayscale range. Tap the control and then tap Up or
Down to select a setting: -3,-2,-1, 0, +1,+2,or +3. The selected
setting is applied to both 2D and M Mode.
The positive range increases the number of grays displayed, and
the negative range decreases the number of grays displayed.
Save Exam See
Type
Imaging
"Gain"
"Saving video clips"
"ECG" on page 4-49.
"Customizing exam types"
Description
on page 4-21). Tap this control and
on page 4-45.
on page 3-31.
Available in
Live Frozen
4-9