Volume Calculation; Volume Flow Calculation - FujiFilm SonoSite X-Porte User Manual

The percent diameter reduction result appears on the clinical monitor and saves to the patient report.

Volume calculation

WARNINGS
The volume calculation involves three 2D distance measurements: Height, Width, and Length. You can
calculate volume on one, two, or all three distance measurements. After any measurement is saved, the
result appears on the clinical monitor and in the patient report.
The volume calculation is available in the following exam types: Abdomen, Arterial, Breast, Gynecological,
Musculoskeletal, Nerve, Small Parts, Superficial.
For a list of exam types on each transducer, see
To calculate volume
Do the following for each image you need to measure:
1 On the frozen 2D image, tap Calcs.
If this control is hidden, tapping More Controls displays it.
2 On the Volume 1, Volume 2, or Volume 3 calculation list, do the following for each measurement you
need to take:
a Tap the measurement name.
b Position the calipers by dragging.
c Save the measurement.

Volume flow calculation

To calculate volume flow in the abdominal exam type, see page 13.
To calculate volume flow in the arterial exam type, see page 17.
Considerations
5-12
To avoid incorrect calculations, verify that the patient information, date, and
time settings are accurate.
To avoid misdiagnosis or harming the patient outcome, start a new patient
form before starting a new patient exam and performing calculations. Starting
a new patient form clears the previous patient's data. The previous patient's
data will be combined with the current patient if the form is not first cleared.
See "Entering patient information"
"Selecting a transducer and exam type"
on page 4-31.
Measurements and calculations
on page 2-14.