Transfer Unit - FujiFilm Revoria Press SC180 Reference Manual

Transfer Unit

Note
Before pulling out the Transfer Unit, check the screen display for any remaining paper in the left and right

covers of the machine, Paper Tray 5 (Bypass), Exit, or optional High Capacity Feeder and Finisher. If the
Transfer Unit is pulled out while paper is remaining in any of these locations, the paper may become torn.
Do not touch locations that are not mentioned in the steps. The inside of the machine may become

stained, and smears may appear on the printed output.
The Fusing Unit is hot. It may cause burn injury. Do not touch this unit.
1.
Open the Front Cover.
2.
Turn the handle [2] of the Transfer Unit to the right until it
becomes horizontal (
front until it stops (
3.
Slowly pull out the visible paper and remove it.
Note
When the paper is torn, confirm that no paper pieces remain.

Do not push the paper in the direction opposite to the arrow

and/or pull it to the front.
4.
Perform the following operation according to the instructions displayed on the screen.
[2a], [2b]
1)
Remove the jammed paper at [2a].
2)
Move the handle [2b] to the right and remove the jammed
paper.
3)
Return the handle [2b].
[2c]
1)
Remove the jammed paper at [2c].
4 Maintenance
28
1
) and pull the Transfer Unit out to the
2
).
Warning