Accessories And Peripherals; Preparing The System; Turning On The System - FujiFilm SonoSite X-Porte User Manual

Accessories and peripherals

The system supports various accessories and peripherals. See
on page 9-12.

Preparing the system

Turning on the system

WARNINGS
Cautions
To turn on the system
The system can be powered by the internal battery or by AC power.
1 If you are operating the system using AC power, connect the AC power cord to the stand, and then
connect the AC power cord to a hospital-grade outlet.
2 Press the power button.
The power button turns green when the system is ready for scanning.
If the system does not maintain expected battery charge, or if the battery icon on the clinical monitor does
not display the battery charge status, disconnect and reconnect the system to AC power.
Connect the system to AC power to maintain battery charge, especially if the system will not be used for
several days.
To connect the system to AC power (battery charge maintenance)
1 Turn off the system.
2 Disconnect the system from AC power.
Getting started
Verify that the hospital supply voltage corresponds to the power supply voltage
range.

Plug the system only into a grounded hospital-grade outlet.

Use only power cords provided by FUJIFILM SonoSite with the system.
Do not use the system if an error message appears on the clinical monitor. Note
the error code and turn off the system. Call FUJIFILM SonoSite or your local
representative.
When using AC power, position the system to allow easy access to disconnect it.
"Compatible accessories and peripherals"
2-3