Zooming In On The Image - FujiFilm SonoSite X-Porte User Manual

Drag the slider. Right moves forward, and left moves backward.
M Mode: While the slider bar represents the complete set of collected imaging data, the scrolling
display shows only one cycle of imaging data at a time. The green CINE marker ( ) indicates a single
column on the scrolling display, which corresponds in time to the displayed image.
Tap the scroll arrows
M Mode: Tapping these controls moves the green CINE marker ( ), showing a column on the scrolling
display and its corresponding image.
Other modes: The current frame number appears on the touch panel. The frame number changes as
you move forward or backward.

Zooming in on the image

You can zoom in on a 2D image in 2D, M Mode, Doppler, and Color imaging. You can freeze or unfreeze the
image or change the imaging mode while zooming.
When you zoom in on an image, the Zoom icon
To zoom in live imaging
1 Tap Zoom.
A zoom box appears.
If this control is hidden, tapping More Controls displays it.
2 Size and position the zoom box over the area that you want to zoom:
To size, pinch or spread the box, or drag
To position, drag the box.
3 Double-tap in the zoom box, or tap Zoom.
To exit zoom, double-tap in the zoom box, or tap Unzoom.
To zoom in Color
1 Position the Color box over the area you want to zoom.
2 Tap Zoom.
If this control is hidden, tapping More Controls displays it.
The area in the box is magnified.
To exit zoom, double-tap in the zoom box, or tap Unzoom.
Imaging
or to move forward or backward through frames one at a time.
appears on the image.
.
4-23