Measurements and calculations
This section provides information about measurements, calculations, worksheets, and
reports.
Measuring
X-Porte offers several types of measurements.
You can perform independent measurements, or you can perform a measurement and
then assign it to a calculation (see
page 5-8). If you want to save a measurement, you must assign it to a calculation (which
saves results to the patient report), or you can save the image with the calipers displayed.
If you prefer to start within a calculation, see
Calipers
You perform most measurements by using calipers that you drag into position. The active
caliper has a round highlighted handle .
To activate calipers
Tap the caliper.
To switch between calipers
Do any of the following:
Tap either caliper.
Tap the switch icon
touch panel.
Tap the caliper under Measure.
Measurements and calculations
"Assigning measurements to calculations"
"About calculations"
beneath the measurement result on the left side of the
on
on page 5-8.
5-1