FujiFilm SonoSite X-Porte User Manual page 121

Saving images
To avoid mixing images saved from multiple patients, make sure that the patient ID is displayed before you
save an image. See "Entering patient information"
on page 3-26.
To save an image
If the Save Image or Save Image & Calcs control is not available, configure the system to display it. See
"To configure custom controls"

Do either of the following:
To save only the image, tap Save Image.
To save the image and to save the current calculation to the patient report, tap Save Image & Calcs.
Note
Saving video clips
To set video clips controls
1 Tap Video Clip Settings.
If this control is hidden, tapping More Controls displays it.
2 Set the following as desired:
Clip Method
Prospective captures frames after you tap Save Video Clip. The system captures frames for the
number of seconds or beats you specify in the Time or ECG list. A forward clip symbol displays in
the system status area.
Retrospective captures frames from presaved data available before you tap Save Video Clip. The
system captures presaved frames for the number of seconds or beats you specify in the Time or
ECG list. A backward clip symbol displays in the system status area.
Clip Type
Time captures based on number of seconds. Select the time duration from the Time list.
ECG captures based on the number of heart beats. Select the R-Wave Count.
Preview Video Clip
Select this option to automatically play and optionally trim a captured video clip (the video clip does
not save automatically to internal storage). If this option is deselected, the video clip saves to internal
storage, and trim controls are not available.
Imaging
on page 3-33.
You can also configure the footswitch to save (see
page 3-32).
on page 4-31 and "Display Information settings"
"User profile settings" on
4-45