FujiFilm SonoSite X-Porte User Manual page 217

System log file
Assert log file
Note: Exporting the Assert log file requires administrator access.
User log file
DICOM log file (DICOM users only)
DICOM settings (DICOM users only)
For information on importing and exporting, see
"Importing and exporting connectivity settings"
To remove a transducer
1 Pull the transducer latch down away from the connector housing, and rotate it clockwise.
2 Pull the transducer connector away from the system.
To remove the engine from the stand
Cautions
1 Locate the two gray latch levers under the left and right sides of the stand head.
Troubleshooting and maintenance
Turn off the system before removing the ultrasound engine from the stand.
Removing the ultrasound system from the stand while the system is powered on
may damage the dock.
Disconnect any devices attached to the ultrasound engine (such as the Triple
Transducer Connect, USB memory sticks, transducers, power cables, or ECG
cables) before removing it from the stand. Failure to disconnect attached devices
may result in damage to the system or accessories.
"Importing and exporting"
on page 3-12.
on page 3-33 and
7-7