Drag the angle cursor to the correct angle.
Tap one of the preset angles on the screen: +60°, 0°, or -60°.
Tap Angle Correct.
If this control is hidden, tapping More Controls displays it.
4 In the Cardiac exam type only, select one of the following modes:
PW - Pulsed wave Doppler
CW - Continuous wave Doppler
TDI - Tissue Doppler Imaging
5 Tap Start or Update.
The spectral trace appears.
6 To make further adjustments, tap either the 2D image or the spectral trace to activate them, or tap Update
to toggle between them.
Related topics
Controls in Doppler ................................................................................................................................................. 4-16
Dual
Dual displays side-by-side 2D and Color images. The system supports independent image information for
each dual side, for example, depth, and orientation markers. You can switch between the two images and
adjust some controls (for example, depth, mode, and gain) independently. You can view frames in the cine
buffer for both dual sides independently.
To scan in Dual
1 Tap Dual. When Dual is on, the control is highlighted.
Dual
If this control is hidden, tapping More Controls displays it.
2 Do either of the following to make an image active:
Tap the right-hand or left-hand image.
Imaging
4-5