FujiFilm SonoSite X-Porte User Manual page 164

Measuring uterus
You can measure uterus length (L), width (W), height (H), and endometrial thickness. If you measure length,
width, and height, the system also calculates the volume.
To measure uterus
1 On the frozen 2D image, tap Calcs.
If this control is hidden, tapping More Controls displays it.
2 On the Uterus list, do the following for each measurement you want to take:
a In the Uterus list, tap the measurement name.
b Position the calipers by dragging.
c Save the measurement.
Measuring ovaries
You can take up to three distance (D) measurements on each ovary. The system also calculates the volume
based on the three measurements.
To measure ovaries
1 On the frozen 2D image, tap Calcs.
If this control is hidden, tapping More Controls displays it.
2 On the Ovary calculation list, do the following for each measurement you want to take:
a Tap the measurement name under Right Ovary or Left Ovary.
b Position the calipers by dragging.
c Save the measurement.
Measuring follicles
On each side, you can save up to three distance (D) measurements per follicle, for up to ten follicles. The
system can display up to eight measurements at once.
If you measure a follicle twice, the average appears in the report. If you measure a follicle three times, the
average and a volume calculation appear in the report. Volumes are derived based on one distance, two
distance, and three distance measurements.
To measure follicles
1 On the frozen 2D image, tap Calcs.
If this control is hidden, tapping More Controls displays it.
5-36 Measurements and calculations