Configuring The Display Settings - FujiFilm synapse HTML5 User Manual

Synapse® Mobility User Guide for HTML5
C
ONFIGURING THE DISPLAY SETTINGS
This section describes how to configure the viewer's display settings, such as the level of metadata
displayed and the quality of the images.
Configuring the level of metadata
The default display setting will automatically set the metadata display level based on the size of the image
view.
You can change this default behavior so that the level of metadata remains constant, regardless of the view
size. There are four possible configurations to choose from.
To configure the metadata display
1. Select Display Settings from the settings
2. Select the desired level of metadata display:
Changing the level of metadata display has no effect when viewing waveform data, such as
ECG test results.
Toggling full screen mode
Depending on the screen size of your device, you may have the option to switch to full screen mode. Full
Screen mode maximizes the amount of screen area dedicated to the image.
To enable full screen
Select Toggle Full Screen from the settings
To disable full screen
Do one of the following:
Select Toggle Full Screen from the settings
Press the Esc key.
Confidential and Proprietary
Auto Metadata Display
Full Metadata Display
Limited Metadata Display
No Metadata Display
menu.
menu
menu.
DOC-0046692-A
Viewer
51