You will find the serial number on the back of the stand column. Raise the stand to maximum height
to reveal the label (see
1. Extend
stand to
maximum
height
c PCBA serial number
d Software version and transducer package version
4 After you obtain a license key, you must enter it into the system. You can enter it either at startup or in
System Setup.
To enter the license key at startup
1 Turn on the system.
The license update screen appears.
2 Enter the license key in the Enter license number box.
3 Tap Enter.
Note
4 If the license update screen reappears, verify that you entered the license key correctly. If the license
update screen still appears, contact FUJIFILM SonoSite Technical Support (see
page 1-2).
7-4
"Adjusting the height and angle"
Do not tap Done. This will close the form without entering the key.
on page 2-4).
2.Serial
number is
located on
back
Troubleshooting and maintenance
"Getting help"
on