Importing And Exporting Connectivity Settings - FujiFilm SonoSite X-Porte User Manual

2 Tap Connectivity in the list on the left.
Connectivity
To specify the system location
The location you specify in Connectivity settings represents the active location of the system.

On the Connectivity settings page, select a location from the Location list.
To receive storage alerts
Caution

On the Connectivity settings page, select Internal Storage Capacity Alert.
The system displays a message if internal storage is near capacity when you end an exam.
Related topics
Network Status settings ...................................................................................................................................... 3-27
DICOM .......................................................................................................................................................................... 3-13

Importing and exporting connectivity settings

You can import and export all location and connectivity settings from and to another SonoSite X-Porte
system. These settings include DICOM configuration data for locations, wireless settings, archivers, printers,
storage commit servers, worklist servers, and MPPS servers.
The system does not import IP addresses or AE titles when you import configuration data from another
system.
Caution
To import connectivity settings
1 Connect the USB memory stick that contains the settings (see
importing or exporting"
3-12
If the save available icon
internal storage may be defective. Contact FUJIFILM SonoSite Technical Support
(see "Getting help" on page 1-2).
To avoid losing data from or damaging the USB memory stick, do not remove the
USB memory stick or turn off the ultrasound system while exporting. In addition,
do not bump or apply pressure to the USB memory stick while it is connected to
the system. The connector could break.
on page 2-6).
35%
does not appear in the system status area,
"To connect a USB memory stick for
Setting up the system