Date And Time Settings - FujiFilm SonoSite X-Porte User Manual

To verify the connection status of devices
1 On the Connectivity setup page, tap DICOM Setup.
2 Tap Verify to confirm that the associated devices are connected. (If Verify is unavailable, check cable and
wireless connections. Restart the system if you changed configuration. If the problem continues, see your
system administrator.)
The connection status of the devices appears in the Status column:
Failed DICOM cannot communicate with the device.
Success DICOM can communicate with the device.
Unknown The device does not support the C-ECHO (for example, Verify query command).

Date and Time settings

WARNING
To display the Date and Time settings page
1 Tap MORE, and then tap System Settings.
2 Tap Date and Time in the list on the left.
Date and Time
To set the date and time

On the Date and Time settings page, do the following:
In the Date boxes, type the current year, month, and day.
In the Time boxes, type the current time in hours and minutes.
To obtain the system time from a time server, select Use Time on Time Server and enter the Server
Address. These options are available only if the DICOM licensed feature is enabled on the system.
Note
To specify that the system automatically adjusts for daylight savings time changes, select Daylight
Savings Time. This option is available only if you select Use Time on Time Server.
Select your time zone from the Time Zone list.
Setting up the system
To obtain accurate obstetrics calculations, an accurate date and time are critical.
Verify that the date and time are accurate before each use of the system.
If you select Use Time on Time Server, you cannot edit the Date and Time. If
you want to edit the Date and Time, deselect Use Time on Time Server first.
3-25