Ending the exam
Note
When you end an exam, the system resets imaging settings to the default settings for the selected exam
type.
1 Make sure that you have saved images and other information that you want to keep (see
images and video clips"
2 Do either of the following:
Tap PATIENT, and then tap End Exam.
Tap End Exam in imaging, in review, or in worksheets. The system returns to the startup location as
specified in User Profile settings (see
If End Exam isn't visible in imaging, specify that it appears as one of the four custom controls. See
profile settings"
on page 3-32.
Patient form fields
Field descriptions
The patient form fields available depend on exam type. In some fields, you can enter symbols and special
characters (see
"To enter text using the onscreen keyboard"
Patient
Last, First, Middle Patient name
ID Patient identification number
Note
Date of Birth
Gender
Accession Enter number, if applicable
Indications Enter desired text
Exam
Imaging
Although you cannot add images and video clips to a patient exam that is ended,
you can automatically start a new patient exam that has the same patient
information. See
"To append images and video clips to a patient exam"
page 4-40.
on page 4-44).
"User profile settings"
The Generate Patient ID option enables the system to auto-generate a unique
patient ID to accommodate certain workflows. For more information, see
"General preferences"
on page 3-32).
on page 2-10).
on page 3-29.
on
"Saving
"User
4-35