FujiFilm SonoSite X-Porte User Manual page 247

You may use these FUJIFILM SonoSite accessories and third-party peripherals with the SonoSite X-Porte
ultrasound system.
WARNINGS
Table 9-2: System components and compatible accessories
Description
a
D2xp transducer
a
C11xp transducer
a
C35xp transducer
a
C60xp transducer
a
HFL38xp transducer
a
HFL50xp transducer
a
HSL25xp transducer
a
ICTxp transducer
a
L25xp transducer
a
L38xp transducer
a
P10xp transducer
a
P21xp transducer
a
TEExp transducer
Bar code scanner
a
For transducers, maximum cable length is measured between the strain reliefs. The stated lengths do not include
the lengths of cable in the following locations: underneath the strain reliefs, inside the transducer enclosure, or inside
the transducer connector.
b
Before you assemble the SonoSite X-Porte Desktop, you must configure the input and output voltages on the
isolation transformer. Incorrect voltage settings can cause damage to the equipment. For instructions, see the Toroid
Superior Transformers Voltage Selections W series IsoBox, included with the isolation transformer.
Safety
Use of the accessories with medical systems other than the SonoSite X-Porte
ultrasound system may result in increased emissions or decreased immunity of
the medical system.
Use of accessories other than those specified may result in increased emissions
or decreased immunity of the ultrasound system.
Maximum Cable Length
5.5 ft / 1.7 m
6.0 ft / 1.8 m
5.5 ft / 1.7 m
5.7 ft / 1.7 m
5.7 ft / 1.7 m
5.7 ft / 1.7 m
7.5 ft / 2.3 m
5.7 ft / 1.7 m
7.5 ft / 2.3 m
5.5 ft / 1.7 m
6.0 ft / 1.8 m
6.0 ft / 1.8 m
7.1 ft/2.2 m
4.8 ft/ 1.5 m
9-13