General Preferences; Brightness - FujiFilm SonoSite X-Porte User Manual

To display the Presets settings page
1 Tap MORE, and then tap System Settings.
2 Tap Presets in the list on the left.
Presets

General preferences

To set general preferences

On the Presets settings page, select from the following lists:
Note
Doppler Scale Select cm/s or kHz.
Note
Thermal Index Select TIS, TIB, or TIC. The setting is retained for the current session. When the exam
is ended or another transducer or exam type is selected, the exam type-based default setting is used.
Units Units for patient height and weight in cardiac exams: in/ft/lbs or cm/m/kg.
Auto Save Patient Form When this option is on, the system saves the patient form as an image in
the patient's exam.
Generate Patient ID When this option is on, the system automatically generates a unique patient ID
upon starting an exam from the patient form, unless a patient ID is entered manually or from the
worklist. This option can be used to accommodate certain workflows.
Prefix Defines a prefix string attached to the beginning of the automatically generated patient ID. This
enables you to easily search for the patient ID on the image storage system at a later time. This option
is available only when the Generate Patient ID option is on.

Brightness

You can adjust the brightness of the clinical monitor or the touch panel to compensate for the level of light
in the room in which the system is located.
To adjust brightness

Do either or both of the following on the Presets settings page:
Drag the Monitor Brightness slider. The range is 0-10.
Setting up the system
Changing Doppler Scale or Units clears all measurements and calculations for
the current exam.
Some calculations are unavailable if the system is set to kHz.
3-29