FujiFilm SonoSite X-Porte User Manual page 95

Table 4-5: Controls in scrolling Doppler (continued)
Button name
Baseline
Invert
Angle Correct
Auto Trace
ECG
Save Exam Type
Label
Velocity
Time
Manual Trace
Auto Measure
Imaging
Description
Sets the baseline position. Tap this control, and then tap
Up or Down.
Tap on (highlighted icon) to switch the displayed
direction of the flow, which helps to reduce the need to
reposition the transducer.
Corrects the angle. Tap this control, and then drag the
slider or select a setting: 0°, +60°, or -60°.
You can also adjust the angle by tapping the
double-headed arrows on the D-line.
Specifies the Doppler trace setting for measurements.
Tap this control, and then tap Off, Peak (time average
peak), or Mean (time average mean).
After you tap Peak or Mean in live imaging, you can
choose between Above, Below, or All to control the
display relative to the baseline. While Peak and Mean
are available both during live imaging and when the
image is frozen, the settings Above, Below, and All are
available during live imaging only
Displays ECG trace options. ECG is available only on the
cardiac exam type. See
See "Customizing exam types"
Provides tools that let you place text, pictographs, and
arrows onto an image. See
page 4-28.
Displays velocity measurements. See
measurements in Doppler"
See "To measure time duration"
Lets you trace manually to measure an irregular shape.
See "Measuring" on page 5-1.
See "To measure automatically"
"ECG" on page 4-49.
on page 3-31.
"Labeling images"
"Basic
on page 5-4.
on page 5-5.
on page 5-7.
Available in
Live Frozen
on
4-19