Cautions
Safety
Excessive bending or twisting of cables can cause a failure or intermittent
operation.
Improper cleaning or disinfecting of any part of the system can cause
permanent damage. For cleaning and disinfecting instructions, see
"Cleaning and disinfecting."
Do not submerge the transducer connector in solution. The cable is not
liquid-tight beyond the transducer connector/cable interface.
Do not use solvents such as thinner or benzene, or abrasive cleaners on any
part of the system.
Do not spill liquid on the system.
Position the system to allow access to the mains power-cord connector.
At high elevations (greater than 1948 meters / 6391 feet above sea level),
always operate the ultrasound engine in the stand.
Chapter 8,
9-7