FujiFilm SonoSite X-Porte User Manual page 44

To create custom obstetrics measurements and tables in the OB Custom Table Editor
You can set up custom tables of up to 120 entries (age tables) or 210 entries (growth tables). Before you
use the SonoSite X-Porte OB Custom Table Editor, make sure that your computer meets the following
minimum requirements:
Windows
Windows Vista, 32-bit or 64-bit, or later
Microsoft Excel 2007 or later, configured to enable all macros and to trust access to the VBA project object
model (see Excel Help for instructions).
Mac OS
Mac OS X 10.5 (Leopard) or later
Microsoft Excel 2011 or later
Entries in the table editor cannot be negative and cannot contain slashes, asterisks, brackets, commas, or
semicolons.
WARNING
1 Open the editor in Excel.
2 Enable macros:
(Windows) Click Enable Content after the Security Warning at the top of the page.
(Mac OS) Click Enable Macros.
3 If needed, specify the language of the editor by selecting a language from the Please Specify Language
list located on the Setup-First tab.
The language selected must match the language of the SonoSite X-Porte system on which you import
the tables.
4 On the Setup-First tab, click the Growth or Age table that you want to edit.
5 Enter a unique name with a maximum of 24 characters in the Author field. You cannot use author names
that occur in system-defined OB calculation tables.
6 Do one of the following:
(Growth tables) Enter values in the Weeks, Min, Mid, and Max fields.
Values in the Weeks column must increase.
(Age tables) Enter values in the Value, Age (weeks), Age (days), Range (weeks), Range (days),
Measurement Name, and Measurement Type fields.
3-8
Prior to use, verify that custom table data entries are correct. The system does not
confirm the accuracy of the custom table data that you enter.
Setting up the system