Usb Devices - FujiFilm SonoSite X-Porte User Manual

To adjust the touch-panel angle

Grasping the sides of the touch panel, pull it forward or push it backward to the desired angle.
To collapse the clinical monitor
Always collapse the clinical monitor before system transport.
1 Adjust the touch panel angle to the lowest position.
2 Grasping the clinical monitor on both sides, align it squarely above the touch panel.
3 Fold the clinical monitor downward over the touch panel. Refer to Figure 2-3 on page 2-5.
Figure 2-3 Clinical monitor collapsed for system transport

USB devices

You can use the USB ports on the system for connecting devices such as a USB printer or a USB memory
stick. For a list of supported devices, see "Compatible accessories and peripherals" on page 9-12.
One of the USB ports at the back of the system is for DVR recording only. See "Ports" on page 2-20 and
"DVR recording" on page 4-47.
USB memory sticks
You can use a USB memory stick to export patient exams, import and export logs and setup configurations,
and to import custom obstetric calculation tables.
Note The system does not support software-encrypted USB memory sticks.
Getting started 2-5