Separation Distance; Compatible Accessories And Peripherals - FujiFilm SonoSite X-Porte User Manual

Prevent the buildup of electrostatic charge. For example, use humidification, conductive floor coverings,
nonsynthetic clothing, ionizers, and minimizing insulating materials.
Discharge your body to earth.
Use a wrist strap to bond yourself to the ultrasound system or to earth.

Separation distance

Recommended separation distances between portable and mobile RF communications
equipment and the SonoSite X-Porte ultrasound system
The SonoSite X-Porte ultrasound system is intended for use in an electromagnetic environment in which
radiated radio frequency (RF) disturbances are controlled. The customer or the user of the SonoSite X-Porte
ultrasound system can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the SonoSite X-Porte
ultrasound system as recommended below, according to the maximum output power of the
communications equipment.
Table 9-1: Separation distance
Rated maximum
output power
of transmitter
(Watts)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance (d) in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

Compatible accessories and peripherals

FUJIFILM SonoSite has tested the SonoSite X-Porte ultrasound system with the following accessories and
peripherals and has demonstrated compliance to the requirements of IEC 60601-1-2:2007.
9-12
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d=1.2 √P
0.12
0.38
1.2
3.8
12
80 MHz to 800 MHz
d=1.2 √P
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
d=2.3 √P
0.23
0.73
2.3
7.3
23
Safety