Table of Contents
Advertisement
System Configuration
Chapter 2
(Product Overview)
2.1 DR-ID1270
2.1.1 System Confi guration
Flat panel sensor unit
Power supply unit*
Access point
• The products in
• Up to fi ve fl at panel sensors can be connected. Up to two fl at panel sensors can be connected to
one power supply unit in wired communication mode. Up to one power supply units can be used.
• The DR-ID1270 consists of the fl at panel sensor DR-ID1271SE, DR-ID1272SE, DR-ID1273SE,
DR-ID1274SE, DR-ID1275SE and DR-ID 1200MC.
• When the power supply unit is used, the system can be operated in conjunction with the X-ray
equipment, and it can be used for exposures in wired mode.
• When the Power supply unit is used, up to two fl at panel sensors can be connected to one power
supply unit in wired communication mode. Up to two power supply unit can be used. When the
fl at panel sensors are used with three to four different techniques, two power supply units are
required.
• When the Power box is used, only one fl at panel sensor can be connected to one power box in
wired communication mode. Up to three power boxes can be used in one system.
• For the Power supply unit and Power box, a maximum of fi ve devices can be connected.
*1 The power supply unit and the power box are optional products. The system can be confi gured
without using these products.
*2 The DR-ID 1200MC can be installed in the image processing unit DR-ID 300CL.
*3 For detail specifi cation of image processing unit, please refer to "DR-ID 300CL Operation
Manual".
DIGITAL RADIOGRAPHY DR-ID1270
Flat panel
sensor
1
Image processing unit
can be installed in patient environment.
Flat panel sensor unit
Flat panel
DR-ID 1200MC
2
(software)*
3
DR-ID 300CL*
DR-ID1270 Operation Manual
sensor
1
Power box*
Battery charger
897N120821E
2
2-1
Advertisement
Table of Contents
