Entering Patient Information; Editing Patient Information - FujiFilm SonoSite X-Porte User Manual

To delete the Mark Out box, select the Mark Out box in the Mark Out list and then tap Delete.
The system displays the image or video clip in full-screen mode.
5 Tap Save.
The system saves the labeled image to the exam.
6 Tap Done to exit labels and return to review.

Entering patient information

The patient form lets you enter identification, exam, and clinical details for the patient exam. This information
appears in the patient report.
After you begin a new patient form, all images, video clips, and other information you save during the exam
are linked to that patient.
You can enter patient information by:
Entering the information manually (see

Importing information from a DICOM worklist server (see
worklist" on page 4-32).
Scanning a patient bar code and obtaining patient information from a worklist server (see
patient information from the worklist with a bar code scanner"
Scanning a patient bar code to obtain the patient ID (see Bar Code Scanner User Guide).

Editing patient information

You can edit patient information if the exam has not been archived or exported and if the information is not
from a worklist.
To edit patient information
1 Tap PATIENT.
2 Make changes as desired.
3 Collapse the onscreen keyboard by tapping outside the keyboard area or tapping
4 Tap Done.
5 Do any of the following:
Tap Modify to save the changes to the current patient.
Tap New to start a new patient exam.
Imaging
"Entering patient information manually"
"Entering patient information from the
on page 4-32).
"To enter
on page 4-32).
.
4-31