Cleaning And Disinfecting The Ecg Cable And Slave Cable - FujiFilm SonoSite X-Porte User Manual

Cleaning and disinfecting the ECG cable and slave cable

Caution To avoid damaging the ECG cable, do not sterilize.
To clean and disinfect the ECG cables (wipe method)
1 Remove the cable from the system.
2 Examine the ECG cable for damage such as cracks or splitting.
3 Clean the surface using a soft cloth lightly dampened in a mild soap, cleaning solution, or pre-moistened
wipe. Apply the solution to the cloth rather than the surface.
4 Wipe the surfaces with a FUJIFILM SonoSite Approved cleaner or disinfectant.
5 Air dry or dry with a clean cloth.
For more information on the ECG slave cable, refer to the ECG Slave Cable User Guide.
Cleaning and disinfecting 8-15