Manufacturer's Declaration - FujiFilm SonoSite X-Porte User Manual

Table 9-2: System components and compatible accessories (continued)
Description
USB flash memory (32 GB)
USB flash memory (64 GB)
USB Wireless Adapter (no cable)
USB Wireless Adapter (cable required)
Isolation transformer (desktop configuration only)
Power cord, isolation transformer (desktop
configuration only)
Power supply, monitor (desktop configuration
only)
Power supply (engine, desktop configuration only)
Power cords (engine and monitor, desktop
configuration only)
Mouse (desktop configuration only)
Digital video cable (desktop configuration only)
a
For transducers, maximum cable length is measured between the strain reliefs. The stated lengths do not include
the lengths of cable in the following locations: underneath the strain reliefs, inside the transducer enclosure, or inside
the transducer connector.
b
Before you assemble the SonoSite X-Porte Desktop, you must configure the input and output voltages on the
isolation transformer. Incorrect voltage settings can cause damage to the equipment. For instructions, see the Toroid
Superior Transformers Voltage Selections W series IsoBox, included with the isolation transformer.

Manufacturer's declaration

The tables in this section document the intended use environment and EMC compliance levels of the
system. For maximum performance, ensure that the system is used in the environments described in this
table.
Safety
Maximum Cable Length
-
-
-
1.0 ft / 0.3 m
b -
6 ft / 1.8 m Monitor pedestal mount (desktop
configuration only)
6 ft / 1.8
4 ft / 1.2 m
3.3 ft / 1 m
6 ft / 1.8 m
22.5 in / 0.57 m
9-15