Printing Images; Archiving And Exporting - FujiFilm SonoSite X-Porte User Manual

Label an image or a frame from a video clip (see
View the report (see
Delete an image or video clip: select the image or video clip, and then tap Delete.
5 Return to the patient list by tapping Patient List, or return to imaging by tapping Exit Review.

Printing images

For information about printing worksheets and reports or about DICOM printing, see
worksheets" on page 5-56 and
Caution
To print while imaging
1 Make sure that the power button on the printer is in the On position.
2 With the image displayed, tap Print.
Note
To print a saved image from a current or ended exam
1 Make sure that the power button on the printer is in the On position.
2 Tap REVIEW.
3 Do one of the following:
Select the check box for an image from a current exam.
Select an image from an ended exam: Tap Patient List, tap the exam, tap Thumbnails, and then
select the check box for an image.
4 Tap Full Screen.
5 Tap Print.

Archiving and exporting

The patient list organizes saved images and video clips in patient exams.
Imaging
"Worksheets and reports"
"Archiving exams"
Printing an image does not necessarily capture all of the characteristics of the
image displayed on the clinical monitor. The printout is intended for
documentation purposes, and may not be suitable for diagnosis. The printed
image is subject to degradation due to age and ambient light conditions.
You can also configure the footswitch to print (see
page 3-32).
"Labeling during review"
on page 5-52).
on page 4-42.
"User profile settings"
on page 4-30).
"Printing reports and
on
4-41