Basic Measurements In M Mode - FujiFilm SonoSite X-Porte User Manual

2 Drag the caliper to the start point.
After lifting your finger from the screen, a pencil icon appears, indicating that the start location is set and
you can begin your trace.
3 Drag the caliper around the area you want to trace.
To make a correction, trace backward on the dotted line.
4 To complete the measurement, remove your finger from the screen.
The trace closes automatically and the measurement results appear.
Note
To perform a Target Depth measurement
You can measure the distance from the skin line to a specified point on the image.
1 On a 2D image, tap Target Depth.
If this control is hidden, tapping More Controls displays it.
A dotted line appears extending from the skin line to a single caliper at the end.
2 Drag the caliper to the desired location.

Basic measurements in M Mode

To measure distance and time
You can measure distance in centimeters and measure time in seconds.
1 On a frozen M Mode sweep, tap Distance Time.
If this control is hidden, tapping More Controls displays it.
A caliper appears.
2 Drag the caliper to the desired location.
A second caliper appears.
3 Drag the second caliper to the desired location.
To measure heart rate
1 On a frozen M Mode sweep, tap Heart Rate.
A vertical caliper appears.
If this control is hidden, tapping More Controls displays it.
Measurements and calculations
Even after completing the trace, you can still adjust the measurement by dragging
the cursor. Drag the cursor backward to erase your trace or forward to extend it.
5-3