FujiFilm SonoSite X-Porte User Manual page 138

To save calculation measurements
When you save a measurement, a checkmark appears next to the measurement, indicating that the value
has been saved.

With one or more measurements on the screen, do any of the following:
Save the selected measurement: Tap
Save all performed measurements in the calculation: Tap Save All.
Save both the selected measurement and the image: Tap Save Image & Calcs. (If the Save Image &
Calcs control is not available, configure the system to display it (see
page 3-32).
To redo or delete a saved measurement
1 On a frozen image, tap Calcs or, for the Acute Care calculations, tap Acute Care.
If these controls are hidden, tapping More Controls displays them.
2 In the calculation list that contains the measurement, do one of the following:
To redo, perform the measurement again.
To save the new measurement, tap
to the patient report and appends the new measurement to the calculation list.
To delete, tap
The measurement last saved is deleted from the patient report. If it is the only measurement, the result
is deleted from the report.
Some measurements can be deleted directly from the report preview. See
page 5-52.
5-10
under the measurement name.
under the measurement name. The new measurement saves
under the measurement name.
"User profile settings"
"Worksheets and reports"
Measurements and calculations
on
on