Labeling Images; Adding Text Labels - FujiFilm SonoSite X-Porte User Manual

Labeling images

You can label live, frozen, or saved images. You can label in full-screen 2D, full-screen trace, dual, or duplex.
You can place text (including predefined labels), arrows, and pictographs.
To set preferences for labels, including predefined text labels, see
Note

Adding text labels

You can add text manually or add a predefined label.
Note
To place text on an image
1 Tap Label.
If this control is hidden, tapping More Controls displays it.
2 Tap Text and do any of the following:
To specify that text and predefined labels connect when you enter them, instead of being placed
separately, tap
To place text manually, tap in the field at the top of the form, type text, and then tap Done.
To add one or more predefined labels, tap them and then tap Done.
Note
To place text manually and add a predefined label, type text in the field at the top of the form, tap in
the field again, and then tap one or more predefined labels. Collapse the onscreen keyboard by
tapping outside the keyboard area or tapping
To clear text or predefined labels, tap Clear.
To undo changes and return to the image, tap Cancel.
To undo changes and return to 2D imaging, tap 2D.
3 Drag the text label to the desired location.
4-28
If you select Clear Labels on Unfreeze in the Presets setup page, the system
clears all labels from an image when you unfreeze the image.
If you zoom or pan an image, the system removes text labels and arrows from the
image.
. Tap to insert text and predefined labels separately.
To replace a label you've added with another label, tap the added label in the
field at the top of the form, and then tap the label with which you want to replace
the added label.
"Labels" on page 3-30.
. Tap Done.
Imaging