Installation Instructions Unpacking the box ........................1 Connecting the wireless adapter to the SonoSite X-Porte system ........2 To install on a system that has a VGA extension bracket ...........2 To install on a system that does not have a VGA extension bracket ........4 To install on a system in desktop mode .................6...
This document provides instructions for inserting and attaching the wireless adapter assembly to the SonoSite X-Porte ultrasound system. After installation, your wireless adapter may need to be activated. To activate your wireless adapter, please contact FUJIFILM SonoSite Technical Support. For contact information, see “Technical support and customer comments”...
Page 3
Plug the wireless adapter into the USB cable. Remove the adhesive backing from the hook and loop strip. Attach the wireless adapter to the underside of the SonoSite X-Porte system. Press and hold the adapter in place for at least 10 seconds to ensure a strong bond.
To install on a system that does not have a VGA extension bracket Perform this procedure on the back of the SonoSite X-Porte system beneath the Power button. If your system includes a VGA extension bracket in this area, see “To install on a system that has a VGA...
Page 5
Remove the adhesive backing from the hook and Attach the wireless adapter to the underside of the SonoSite X-Porte system. Press and hold the loop strip. adapter in place for at least 10 seconds to ensure a strong bond.