FujiFilm SonoSite X-Porte User Manual page 126

Cautions
To use the ECG feature
1 Select the cardiac exam type on the P10xp, P21xp, or TEExp transducer (see
and exam type" on page 2-14).
2 Connect the ECG cable to the ECG port on the ultrasound system.
ECG tracing is enabled automatically.
Note
Figure 4-6 ECG port
3 Tap ECG.
If this control is hidden, tapping More Controls displays it.
4 Do any of the following in the ECG Settings window:
To display the ECG trace, select Show.
4-50
Use only accessories recommended by FUJIFILM SonoSite with the system.
Connecting an accessory not recommended by FUJIFILM SonoSite can damage
the system.
If you defibrillate a patient while the ECG module is connected to the system, the
ECG signal may display incorrectly, and the ECG module may need to be
replaced.
The ECG signal may take up to one minute to restabilize after defibrillator use
on a patient.
"Selecting a transducer
Imaging