Functions - FujiFilm SonoSite X-Porte User Manual

IT Network

Functions

This device can be connected to an IT network to perform the following functions:
Storing the examination data (static images, clips) acquired by this device in a Picture
Archiving and Communication System (PACS) by DICOM communication.
Querying examination orders from the Modality Worklist (MWL) server by DICOM
communication and starting them.
Setting the time of this device by interrogating the network time service.
Communicating procedure status via the Modality Performed Procedure Step (MPPS)
service.
Requesting transfer of responsibility for image ownership to another system via the
Storage Commitment service.
Network for connecting the device
To ensure safety, use an IT network that is isolated from the external environment by a
firewall.
Specifications for the connection
Hardware specification
802.11 b/g/n
Ethernet 10/100/1000 BASE-T using RJ45 port with patch cable
Security
The port for DICOM communication (specified by the user in the system settings;
typically port 104, 2762, or 11112) is used for outgoing communication to the network.
IT Network 11-1