FujiFilm SonoSite X-Porte User Manual page 248

Table 9-2: System components and compatible accessories (continued)
Description
Batteries (set of 3)
Clinical monitor
Dock
DVR USB flash memory (64 GB)
ECG lead wires
ECG module
ECG slave cable
Ethernet cable
Footswitch
Kensington security cable
PowerPark Docking Station
Mobile Printer (black and white)
AC Printer (black and white)
SPMU (Stand Power Management Unit)
Stand
Stand power cord
Touch panel
Triple Transducer Connect
Ultrasound engine
USB flash memory (16 GB)
a
For transducers, maximum cable length is measured between the strain reliefs. The stated lengths do not include
the lengths of cable in the following locations: underneath the strain reliefs, inside the transducer enclosure, or inside
the transducer connector.
b
Before you assemble the SonoSite X-Porte Desktop, you must configure the input and output voltages on the
isolation transformer. Incorrect voltage settings can cause damage to the equipment. For instructions, see the Toroid
Superior Transformers Voltage Selections W series IsoBox, included with the isolation transformer.
9-14
Maximum Cable Length
-
-
-
-
24 in / 0.6 m (USA/Japan)
24 in / 0.6 m (EU)
5.8 ft / 1.8 m (USA)
5.8 ft / 1.8 m (Japan)
5.8 ft / 1.8 m (EU)
8 ft/2.4 m
10 ft / 3 m
10 ft / 3 m
6 ft / 1.8 m
-
-
-
-
-
10 ft / 3.1 m
-
-
-
-
Safety