FujiFilm SonoSite X-Porte User Manual page 51

1 Connect the Ethernet cable to the Ethernet port on the back of the dock (see
With the system on, the LAN link light (green LED) next to the Ethernet connector indicates physical
connection to the network.
2 See "DICOM configuration pages"
network settings.
To connect to the network wirelessly
Wireless connectivity is a licensed feature.

See "DICOM configuration pages"
network settings.
The wireless icon
the strength of the connection).
(Optional) To import or delete wireless certificates
If your security scheme requires it, you can import wireless certificates. The system supports the following
file types: CER, PFX, and PVK.
Caution
1 Tap MORE, and then tap System Settings.
2 Tap Connectivity in the list on the left.
3 On the Connectivity setup page, tap Wireless Certificates.
A list of certificates on the system appears.
4 Do one of the following:
Import certificates: Connect the USB memory stick that contains the certificates (see
USB memory stick for importing or exporting"
system, plus those on the USB memory stick, do not exceed 20. Delete certificates if necessary. Then
tap Import.
Note
Delete certificates: Select the certificates to delete, and then tap Delete
5 Tap Done.
6 Restart the system.
Setting up the system
on page 3-16 to configure and save a location with the correct
on page 3-16 to configure and save a location with the correct
indicates the status of the wireless connection (the number of white bars indicates
To avoid losing data from or damaging the USB memory stick, do not remove
the USB memory stick or turn off the ultrasound system while exporting. In
addition, do not bump or apply pressure to the USB memory stick while it is
connected to the system. The connector could break.
Certificates on the USB memory stick replace certificates on the system.
on page 2-6). Verify that the certificates on the
"Ports" on page 2-20).
"To connect a
3-15