FujiFilm SonoSite X-Porte User Manual page 165

2 On the Follicle Right (if measuring the right side) or Follicle Left (if measuring the left side) calculation
list, do the following for each measurement you want to take:
a Tap the follicle number. If this is the first follicle you are measuring, tap 1.
b Position the calipers by dragging.
c To measure a second dimension of the same follicle, tap Next, or to save just the first measurement, tap
under the follicle number.
A superscripted measurement number appears after the follicle number to indicate the dimension being
measured.
d Position the calipers by dragging.
e Tap under the follicle number to save the first two measurements.
f To measure a third dimension of the same follicle, acquire a new image of the follicle, and then tap the
same follicle number.
A superscripted measurement number appears after the follicle number to indicate the dimension being
measured.
g Position the calipers by dragging.
h To save the third measurement, tap
Measurements and calculations
under the follicle number.
5-37