Cleaning And Disinfecting; Before Getting Started - FujiFilm SonoSite X-Porte User Manual

Cleaning and disinfecting

This section updates the instructions for cleaning and disinfecting the ultrasound system,
transducers, and accessories.
Use the FUJIFILM SonoSite recommendations when cleaning or disinfecting your
ultrasound system, transducer, and accessories. Use the cleaning recommendations in the
peripheral manufacturer's instructions when cleaning or disinfecting your peripherals.
The system and transducers must be cleaned and disinfected after each exam. It is
important to follow these cleaning and disinfecting instructions without skipping any steps.
See www.sonosite.com/transducers, for transducer images.

Before getting started

Follow the disinfectant manufacturer's recommendations regarding appropriate personal
protective equipment (PPE), such as protective eyewear and gloves.
Inspect the system and transducer to determine that it is free of any unacceptable
deterioration, such as corrosion, discoloration, pitting, or cracked seals. If damage is
evident, discontinue use, and contact FUJIFILM SonoSite or your local representative.
Confirm that cleaning and disinfecting materials are appropriate for your facility's use.
FUJIFILM SonoSite tests cleaners and disinfectants for use with FUJIFILM SonoSite
systems and transducers.

Disinfectants and cleaning methods listed in this chapter are recommended by
FUJIFILM SonoSite for efficacy and material compatibility with the products.
Ensure that the disinfectant type and the solution strength and duration are appropriate
for the equipment and application.
Follow manufacturer recommendations and local regulations, when preparing, using and
disposing of chemicals.
Cleaning and disinfecting
Ensure that cleaning and disinfecting solutions and wipes are
WARNINGS
not expired
Some cleaners and disinfectants can cause an allergic reaction
to some individuals.
8-1