Adding Arrows; Adding Pictographs - FujiFilm SonoSite X-Porte User Manual

4 Make changes as needed:
To edit the text, select it in the Label list and tap Edit.
To remove the text, select it in the Label list and tap Delete.
To remove all text labels, tap Remove All Text in the Label list.

Adding arrows

You can add an arrow graphic to point out a specific part of the image. The system deletes arrows from the
image when you zoom, pan, or unfreeze the image.
To place an arrow on an image
1 Tap Label.
If this control is hidden, tapping More Controls displays it.
2 Tap Arrow.
3 Position and orient the arrow:
To position the arrow, drag it.
To orient the arrow, drag the circle's edge.
To remove the arrow, select it and then tap Delete in the Arrow list.

Adding pictographs

The pictograph set available depends on transducer and exam type. Each pictograph you place includes a
transducer orientation icon.
To place a pictograph on an image
1 Tap Label.
If this control is hidden, tapping More Controls displays it.
2 Tap Picto.
3 Tap the desired pictograph, and then tap Done.
4 Drag the pictograph to the desired location.
5 Position and orient the transducer orientation icon:
To position the icon, drag it.
To orient the icon, drag the circle's edge.
To remove the pictograph, select it, and then tap Delete in the Picto list.
Imaging 4-29