Lamination Tab - HID Fargo DTC5500LMX User Manual

3.6 Lamination Tab

These options allow control of the printer's lamination process. When no laminator is detected, the
lamination tab is active but all functions are disabled.
Field
Lamination Position
Lamination Speed
Lamination Side
November 2015
Printing Preferences
Description
Use this control to adjust the horizontal position of the laminate. Only the horizontal
position needs adjustment. Default is 0.
To adjust the position, click on the horizontal adjustment arrows. The adjustment
arrows point in the direction the patch will move on the card.
The maximum horizontal value is 100 Pixels (10 Pixels = 0.03 [0.8mm]).
Transfer Dwell Time: Adjust this control for the throughput speed of a card in
seconds per inch, default is 2.0 seconds per inch.
• Maximum Limit - 4.9 seconds per inch
• Minimum Limit - 0.8 seconds per inch
Specify the side(s) of the card to laminate:
• No Lamination
• Front
• Back
• Both
Page 3-15
PLT-02496, Version: 1.0