Adjusting the Transfer Dwell Time and Temperature
Use the Image Transfer option to control of the Transfer Dwell Time and Transfer
Temperature.
•
These settings control the speed and temperature at which printed images are
transferred from the HDP Film to the card. These settings may vary depending on the
card type.
•
The Printer Driver automatically optimizes these settings according to the selection made
in the Card Type option.
•
Changes made to the Dwell Time and temperature settings are saved for the selected
Card Type option (upon exiting the Printer Driver setup in the Printer's Control panel).
HDPii High Definition Card Printer/Encoder User Guide
L001130 Rev 1.4
200