Table 97: Wbm "802.1X" Page - "Port Settings" Tab - WAGO 852-1305 Manual

WAGO-ETHERNET-Zubehör 852
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Table 97: WBM "802.1x" Page – "Port Settings" Tab
Reset to Default
Port Status
Parameters
Port
802.1x State
Admin Control Direction
Reauthentication
Port Control Mode
Guest VLAN
Max-req Times
Reauth-period
Quiet-period
Supp-timeout
Server-timeout
Manual
1.1.0
Configuring in the Web-Based Management System (WBM)
 No custom settings for 802.1x port

 The custom settings for 802.1x port
Default Description
1 ... 10
This column displays the port numbers.
Disable This column displays if 802.1x authentication for a
Enable port is enabled or disabled.
Both This column displays the "Admin Control
In Direction".
Disable This column displays if the subscriber has to enter
Enable the user name and password regularly to remain
connected to the port.
Auto, This column displays the port control mode.
Force
Authorized,
Force
Unauthorized
Disable This column displays the guest VLAN setting for
Enable hosts where authentication failed.
1 ... 10 This column displays how often the switch attempts
to connect to the authentication server before it sees
the server as not connected.
0 ... 65535 This column displays at what interval a subscriber
must enter the user name and password to remain
connected to the port.
0 ... 65535 This column displays the time that a client must wait
before it can request authentication again.
0 ... 65535 This column displays how long the switch should
wait before communicating with the switch.
0 ... 65535 This column displays how long the switch should
wait before communicating with the client.
authentication are reset to the default values.
authentication are reset to the default values.
227